Woodworking business ideas

Introduction

Almost every inhabitant of our planet dreams of opening a private business that brings a stable income. However, a fairly wide choice of business confuses just a novice businessman. To open your own profitable enterprise, you need your own capital. And in order for all investments to pay off in the near future, a thorough development of a business plan is needed. In this article, we will look at the woodworking business idea and its plan.

Correct choice

Before organizing your own enterprise, you will need to draw up a business plan for a woodworking business. This document will help you determine all the necessary costs. Market research of the market will also be required.

A business plan for a woodworking business can be drawn up independently, or you can give this business to qualified specialists.

Production locations

To organize a woodworking business, you will need a room in which a woodworking workshop will be located. The room in which the wood will be processed must be large. And this is important, since the entire premises will be divided into several zones: an area for a workshop, an area for a warehouse for storing raw materials and manufactured products. You will also need utility rooms for employees, a dining room, a toilet and an office for the administration (chief).

All this requires preliminary planning. If the premises for opening this business are rented or purchased at our own expense, then some repairs will be needed. Surely the building will need redevelopment. It is unlikely that you will be able to find such a space that would have all the areas necessary for your business.

Staff selection

Here, first of all, I would like to note that the productivity of this activity directly depends on the working staff, and, therefore, your income.

Woodworking business ideas

Administrator "over a year ago

A little background

The idea of ​​creating your own company arose at a time when you got tired of the constant moving from place to place. And over the years it becomes more and more difficult to work in the harsh conditions of Siberia. I decided to start woodworking, as many saw and cut wood, and there are not so many companies or small firms that process wood. By the way, we have a similar situation with the oil sector.

The idea is, of course, good, but it was necessary to draw up at least some kind of plan. I decided to divide my plan into three parts: 1) Probationary period (if there are orders, then I will hire a couple of workers and we will continue to work, if not - I will close) 2) Advertising and PR of our company, as a result, attracting clients. ) Increase in the area of ​​the enterprise.

Implementation of a business idea in woodworking

It all started about 2 years ago. Although I traveled all over Siberia, I had my own private house in a small village in the Irkutsk region. There I decided to organize production. To begin with, it was necessary to purchase at least a minimum of equipment. Most of my old tools have fallen into disrepair during the endless blanks. I didn't know if my business would be successful. It is for this reason that I decided not to invest heavily in various equipment. Basically I took second-hand, borrowed some tools from my acquaintances and friends.

Here I would give my first advice: do not invest huge amounts of money if you are not 110% sure that your business will be successful.

Let's go back to the hardware. And it was this: two chainsaws, a pair of axes and various woodworking machines. Many of them were still of Soviet production. As a result, all the tools and machines cost me 60 thousand rubles. It took a lot of time to install and place all this stuff. I placed most of it in my garage. This is a startup in modern terms.

The legal aspect of woodworking as a business

However, the most difficult part was the paperwork. After spending a lot of hours on legal forums, I decided to register myself as I. Then I paid taxes as an individual entrepreneur. The processing of various documents took several months, it is very tiring.

Here I would give my second advice: it would be nice to understand the jurisprudence of our country, it will greatly save your invaluable time.

First order

Having finished all the bureaucratic procedures, I proceeded to the first stage. The principle of my work was simple: they make an order for me (for example: I need to process wood for building a house), I buy wood, process it - I send it to the customer. I waited for the first order for a short time. It was necessary to produce lining for the upholstery of a private house.

And in order for all investments to pay off in the near future, a thorough development of a business plan is needed. In this article, we will look at the woodworking business idea and its plan.

Premises for opening a woodworking business

It is reasonable to bring the location of the future woodworking shop closer to suppliers and consumers. Large production areas are needed (from 500 m2 to 750 m2), since in addition to the production workshop, you will need warehouses for raw materials and finished products, repair and administrative premises, sanitary facilities and a shower room, as well as a rest and meal room.

Personnel and equipment for the woodworking workshop

When choosing working personnel, preference will be given to specialists with experience of similar work for three years. You will need woodworking machine operators, locksmiths, a forklift driver, helpers and a watchman. You cannot do without executives and technologists, but in addition to experience, they must also have specialized education.

As for equipment, marketers note the priority of domestic machines over foreign ones. The advantages of native equipment are more than enough. This is an abundance of choice, and adaptability to repairs (availability of spare parts, diagrams, drawings; the possibility of replacing parts), and the possibility of using imported tools in the work, and most importantly - a more "down-to-earth" price compared to a foreign analogue. In addition, the firms that sell machine tools are well aware of the weaknesses of local manufacturers. There is no point in buying and selling low-quality products.

Imported models are in the lead among the tool. For example, six-meter saws Banholzer, Sandflekx, Womaco, installed on our sawmills, in addition to the maximum feed and cutting speed, will provide a perfectly clean processing line. SAMSon cutters can be considered the standard for the production of high-quality Euro lining, floorboards, baseboards and platbands. However, some of our craftsmen have adapted to sharpen their own instrument so that the products they produce do not differ from those that have passed the "foreign" processing.

Raw materials and technologies

For the manufacture of molded products in the classic version, you will need a dry edged board obtained from conifers or aspen.

The technological process includes several operations:

  • unloading (with storage or transfer to a production line);
  • receiving finished products using a four-sided machine;
  • stacking finished products to the warehouse or direct shipment to the buyer.

Such an uncomplicated set of operations with a small number of personnel and equipment located in relatively small areas creates the preconditions for profitable work even with small production. But profitability can be significantly increased if volumes are increased, and as raw materials, instead of edged dry boards, use undried unedged boards. The price of an unedged board is half the price.

True, you will have to fork out for additional equipment, since the technological process will be supplemented with new operations:

  • unloading to a warehouse or transferring to a production line;
  • receiving edged boards on a two-saw machine;
  • crushing lath trims into fuel chips ( subsequently it is used to heat the drying chamber);
  • drying (to the required humidity) of the obtained edged boards in the drying chamber;
  • obtaining finished products using a four-sided machine;
  • storage of finished products in a warehouse or shipment to a consumer.

Everyone wants to have their own business, which will bring him a constant and stable income. One of such businesses is a business idea for woodworking, since today this material is in great demand and practically no field of activity can do without it.

No matter how easy this undertaking may seem at first glance, in any case it is necessary to draw up a detailed business plan, conduct market research. All this will allow you to have complete information in the future and react much more quickly to any changes, both in the external and internal environment. Such a business plan can be drawn up either by yourself or by contacting organizations that provide such services.

After all administrative issues are resolved, you can proceed to finding a suitable room.

Such a room should be large and spacious, since it should accommodate the workshop itself, a warehouse for products, a place for storing raw materials, as well as an office for managing personnel.

After finding the premises, we start searching for employees. It is necessary to approach their search responsibly, since your future income will depend on them.

The secret of big money or the "Key to profit" strategy I want to share my own experience: I'll tell you about my way of making big money .. more

Your employees' productivity will also be influenced by their experience, so when hiring, make this factor a priority.

Business idea: opening a woodworking production

Almost all the work on organizing the business is over, the most difficult thing remains - it is the search for raw materials.

You must understand that the quality of your products will depend on the quality of raw materials, and therefore your income and reputation.

Also, special attention should be paid to the technique and equipment that you will use in the process of your main activity.

Fortunately, the market is full of organizations that will be ready to offer you new equipment, so you can choose the best.

Material on the topic: "Woodworking business ideas" with full explanation and justification.

Business ideas from scratch

Woodworking

Administrator "over a year ago

A little background

The idea of ​​creating your own company arose at a time when you got tired of the constant moving from place to place. And over the years it becomes more and more difficult to work in the harsh conditions of Siberia. I decided to start woodworking, as many saw and cut wood, and there are not so many companies or small firms that process wood. By the way, we have a similar situation with the oil sector.

The idea is, of course, good, but at least some kind of plan had to be drawn up. I decided to divide my plan into three parts: 1) Probationary period (if there are orders, then I will hire a couple of workers and we will continue to work, if not - I will close) 2) Advertising and PR of our company, as a result, attracting clients. ) Increase in the area of ​​the enterprise.

Implementation of a business idea in woodworking

It all started about 2 years ago. Although I traveled all over Siberia, I had my own private house in a small village in the Irkutsk region. There I decided to organize production. To begin with, it was necessary to purchase at least a minimum of equipment. Most of my old tools have fallen into disrepair during the endless blanks. I didn't know if my business would be successful. It is for this reason that I decided not to invest heavily in various equipment. Basically I took second-hand, borrowed some tools from my acquaintances and friends.

Here I would give my first advice: do not invest huge amounts of money if you are not 110% sure that your business will be successful.

Let's go back to the hardware. And it was this: two chainsaws, a pair of axes and various woodworking machines. Many of them were still of Soviet production. As a result, all the tools and machines cost me 60 thousand rubles. It took a lot of time to install and place all this stuff. I placed most of it in my garage. This is a startup in modern terms.

The legal aspect of woodworking as a business

However, the most difficult part was the paperwork. After spending a lot of hours on legal forums, I decided to register myself as I. Then I paid taxes as an individual entrepreneur. The processing of various documents took several months, it is very tiring.

Maybe you will be interested
How to start a business with minimal investment - TOP 10 ideas for a beginner entrepreneur Useful tips for a startup
Business ideas
  • 28-02-2021
  • Reading time 15 minutes
Woodworking business ideas
Woodworking business ideas
  • 28-02-2021
  • Reading time 18 minutes
Business on the Internet: original ideas for aspiring businessmen
Original business ideas - Original business ideas
  • 01-03-2021
  • Reading time 17 minutes
DIY business ideas
DIY business ideas
  • 28-02-2021
  • Reading time 21 minutes
New
7 steps to start a business in the USA for a foreigner
New ready-made business plans
  • 28-02-2021
  • Reading time 9 minutes
Business in a small village ideas
Business in a small village ideas
  • 28-02-2021
  • Reading time 9 minutes
Interesting job in a small town
Interesting job in a small town
  • 28-02-2021
  • Reading time 24 minutes
The best business plan
Business ideas for women from scratch
  • 28-02-2021
  • Reading time 24 minutes
The best business books to read - TOP 50
What business to open for an immigrant in the USA
  • 28-02-2021
  • Reading time 18 minutes